Snapco has re-invented todays pallet dispenser.  If you have personally dealt with headaches from dealing with a tempermental dispenser in the past, we are your aspirin!

Competitors typical pallet dispenser:
-scissor style lift
-Dogs (pins) extend and return to trap a pallet while the scissor lift brings the bottom one down.
-Sensors monitor:
     1. Scissor Lift
     2. Scissor Down position
     3. pins extended
     4. pins return
    
Our SPENCER:
-Four rotary screws all synchronized to a single gear motor.
-Sensor monitors when a pallet has dropped.

The Advantages:
-Spencer's controls are "FAR" less complicated than the typical dispenser.  This means our costs are less to build a typical panel for the machine.
-On a typical pallet dispenser, the fork lift operator loads the pallet normally crooked and mis-aligned which is how they fall onto the conveyor lying below.  downstream the pallets typically have to be re-aligned for proper palletizing of the goods.  Ours perfectly aligns every pallet as they are dispensed because its screws push the pallet to a common wall every time! So no matter how they are loaded, they always come out the same!  This can eliminate downstream headaches with a customers machines.


© 2009 - Snapco, Inc. All rights reserved.

All Our Products Are
Proudly Made In The USA!

Our patented screw
is the key to perfection!